AUTOMATICA E 450-550-650
Features
Single head, rising blade cutting-off machine with automatic cycle, for 90° cutting, equipped with N/C bar feeder, cutting positional tolerance down to ± 0.05 mm. The machine is provided with a pneumatic system for automatic separation of the cut piece in order to ensure maximum quality of the cut surface. Blade feed can be pneumatic or hydraulic; hydraulic feed makes the machine especially useful for cutting large profiles. Programming is via the PCL unit onboard the machine.
Features
-Feeder with Bride Clamps (optional): Bar feed system based on the use of a controlled axis to ensure, thanks to the recirculating ball feed screw, great accuracy in positioning. Programming via the PLC onboard the machine. The set of bridge clamps optional) allows maximum versatility in clamping widely differing profile geometries as well as the rapid set-up of the workpiece clamping cylinders.
-45 Degree Clamps (optional): Optional accessory which allows correct clamping and cutting of profiles with irregular geometry, thus ensuring maximum rigidity and holding of the accuracy, which is the outstanding characteristic of the machine. The use of this system is also characterized by the simplicity and rapidity of the setup.
-Cutting Zone: Optional accessory which allows correct clamping and cutting of profiles with irregular geometry, thus ensuring maximum rigidity and holding of the accuracy, which is the outstanding characteristic of the machine. The use of this system is also characterized by the simplicity and rapidity of the setup.
-Control: The control zone consists of a control console equipped with a PCL unit from which is it possible to program single cuts or cuts from cutting lists either locally or in remote mode by using the connection via serial port. The machine control is complete with a clamp pressure regulating system and predisposition for adjusting the blade outfeed rate
