Features
The Titan III combines Y-Axis linear ways with SureTrack pitch line rack and pinion drive to provide the smoothest cut edge and precise holes. Wider end trucks with maximum guide roller spread further stabilizes the X-Axis motion for the utmost cut edge performance. Designed to address your cutting and marking needs in variety of industries, the Titan III can be configured with high definition plasma, and oxyfuel torches, markers, pipe and tube cutting, and so much more.
STANDARD FEATURES
- Cutting widths 6’ to 16’
- Cutting lengths up to 150 feet
- Machine motion accuracy; +/- .010” accuracy; .010” repeatability (compensated machine motion in 72”) measured with a laser
- Cuts material from 26 ga. up to 12” thick plate
- Cuts mild steel, stainless steel, aluminum
- Contouring speeds up to 400 ipm
- Positioning speeds up to 1,700 ipm
- Reinforced steel weldment construction with high rigidity beam (less than 0.001” bend and 0.002 degrees of twist)
- Machined mating surfaces and bores (critical tolerances of 0.002” maintained)
- Power track in both axes is standard
- Up to eight torch stations (maximum two plasma stations)
- Up to three torch stations will cover full rated cutting width
- Global ControlPlus, Windows® based with easy to use operator interface
- Right or left hand mounted control console with tilt and swivel for operator comfort
- Virtual Service™ remote consultation and diagnostics
- High productivity Smart Lifters on board
- SureStop Collision Sensor with easy and accurate reset
- Advanced oxy-fuel technology provides consistent piercing and faster cutting
- Designed and manufactured in the USA to machine tool and ISO 230-2 standards
- UL available
OPTIONAL FEATURES
- Precision plasma up to 800 amps
- Plasma bevel units: Deltae, Manual Plasma Stripping Bevel Unit for the X-Axis
- Turbo Flame™ or ALFAT™ oxy-fuel torches
- Oxy-fuel bevel units: Single Position and Three Position
- Lifters: PL-1 Plasma Lifter with SureStop Collision Senor, SL-Lifter, SensoMat®-PAN
- Advanced oxy-fuel technology with Omniflow automated gas control system
- Auto torch spacing with programmable torch selection
- FT100 Torch ignitor, and automatic height control for oxy-fuel systems
- Dual Hi-Lo for oxyfuel
- Plate markers: Plasma, Air Scribe, Pneumatic Punch, Zinc Powder, Ink-Jet, and Telesis® Pin Stamp®
- Digital Video Camera
- Laser Pointer
- Global Reporter
- Programming and nesting software
- Electric drilling up to ½”
- Operator glare curtain
- Pull Cord and Photo Eye E-Stops
- Plasma Air Booster
- Rotary rail cleaners with gear rack air purge
- Zoned exhaust tables, including self-cleaning Slagger®
- Messer dust collection system
- Exhaust ducting kits
- Flex Zone for pipe, tube and structural steel cutting
- Rotary Pipe and Tube cutting system
- Material handling systems
- Sentry Service Preventative Maintenance Program
