Features
Manufacturing costs are lower using the combination machine technology:
- Small kerf angle (vertical cuts)
- Dross-free cutting
- Additional features such as forming (countersinks, tread plate, louvers), drilling and tapping can be added to eliminate additional downstream operations, allowing parts to be completed in a single operation
- Labor costs are lower because it takes significantly less time to manufacture the parts
- Operating costs are lower
- Amortization of capital costs is significantly lower since
- Lower initial capital cost than laser
- Faster cycle time – Cost of capital per fabricated part is lower because capital costs are amortized over more fabricated parts.
SPECS
- PUNCHING FORCE: 55 Tons
- MATERIAL THICKNESS
- Minimum: 0.060″
- Maximum: 0.750″
- MAXIMUM PUNCH DIAMETER: 5.000″
- PUNCHING CAPACITY A36 (60ksi / 410 MPa Shear Strength)
- 0.250″ (6 mm): 5.000″ (shear)
- 0.375″ (10 mm): 3.234″ (shear)
- 0.500″ (12 mm): 1.938″ (shear)
- 0.625″ (16 mm): 1.234″ (shear)
- 0.750″ (19 mm): 0.766″ (flat)
- PUNCHING HIT RATE: 180 HPM
- 10 gage (3 mm) material punched on 1″ (25.4 mm) centers
- PROCESSING AREA
- X-axis: 120″
- Y-axis: 63″
- POSITIONING SPEED PER AXIS: 2,000 in/min
- MINIMUM PROGRAMMED INCREMENT: 0.001″
- MAXIMUM MATERIAL WEIGHT: 992lbs.
- MAXIMUM BLANK SIZE: 60″ x 120″
- APPROXIMATE SHIPPING WEIGHT: 66.000lbs.
- FOUNDATION REQUIREMENT: A 6.00” / 150 mm thick reinforced concrete is an acceptable foundation for the machine
- ELECTRICAL REQUIREMENTS: 460/3/60 – 175A
- PNEUMATIC REQUIREMENTS: 50 scfm @ 90 psi
- WATER REQUIREMENTS – 1/2″ NPT inlet: 330 gallons (initial fill)
- APPROXIMATE FLOOR SPACE
- Front – Back: 340″
- Left – Right: 284″
- Height (Tool Changer): 130″
- Height (Press Frame): 113″
- Height (Power Island): 97″
For more details on this machine, and the long list of included features, contact your Sales Engineer or request a quote, via the link above.