There is a Rousselle Punch Press to meet your metal working needs – notching, flanging, punching, trimming. Explore four styles of punch press: Single Point Gap Frame, Two Point Gap Frame, Two Point Straight Side, and Adjustable Bed, Deep Throat/Horn Presses
Features
Download the SPEC sheets to read up on the full list of standard features, options and model specs for each style press.
Rousselle Single Point Gap Frame – SPECS
- 15 to 110 Tons
- Cast iron frame
- Air Clutch and Shoe Brake
- Crankshaft Motion (40 Ton and Up)
- Eccentric Shaft Motion (15 and 25 Ton Models)
- Wrist Pin Connection
- V Gibbing
- Air Counterbalance System (60 Ton and Up)
- Bolster Plate
- Solid State Press Control (ANSI B11.1)
- Operator Station with Dual Run, Emergency Stop and Stop on Top Palm Buttons
- Supervisory Key Selector Switch for Off, Single Stroke, Inch or Continuous Mode
- Pressure Switches for Clutch/Brake and Counterbalance
- Forward/Reverse Feature
- Stroke Counter
Rousselle Two Point Gap Frame – SPECS
- Steel Fabricated
- Air Clutch
- Shoe Brake
- Wrist Pin Connection
- V Gibbing
- Air Counterbalance System
- Eccentric Shaft Motion
- Bolster Plate
- One Shot Lubrication
- Manual Slide Adjustment
Rousselle Two Point Straight Side – 40 to 100 Ton SPECS, 150 to 400 Ton SPECS
- All Welded Steel Frame with Double-Wall Bed Construction
- Pre-Stressed Tie Rods Ensure Minimum Deflection
- 4″ Above Bottom of Stroke
- Eccentric Geared Motion
- Adjustable 8 Point Gibbing
- Air Counterbalance System
- Combination Air Clutch and Brake
- Solid State Press Control (ANSI B11.1)
- Above Floor Construction
- Bolster Plate
- Powered Slide Adjustment with Digital Position Indicator
- Self-Monitoring Automatic Lubrication System
Rousselle Adjustable Bed, Deep Throat and Horn Presses – SPECS
- 15 to 60 ton models available
- Cast Frame (F and G Models) Steel Frame (40 and 60 Ton) Horns
- Air Clutch and Shoe Brake
- Crankshaft Motion (40 and 60 Ton)
- Eccentric Shaft Motion (15 and 25 Ton Models)
- Air Counterbalance System (60 Ton and Up)
With 60 years of experience and over 50,000 Heim/Rousselle units built and used worldwide, the Heim Group takes pride in providing our customers an affordable, quality product, with the best performance and service. Rousselle single-crank machines range in size from 15 to 300 tons; and their straight side presses range in size from 40 to 400 tons. Heim’s exclusive Maxi-Stamper Press is available in tonnage capacities from 200 to 100 tons. Whatever the application, The Heim Group has what it takes to build the press that fits your stamping needs!
