- Structural Steel Beam Coping Systems
- Tandem Drill and Robotic Coping Systems
Features
Structural Steel Beam Coping Systems
the RAZ by FICEP sets the highest level of productivity ever achieved on a stand alone thermal cutting robot
Makes easy work of:
- Bolt holes
- Copes
- Blocks
- Cut off
- And numerous other complex routines
Unique Features:
- Laser scanning of the entire profile to be cut in seconds eliminates the need to probe at the start of each hole or cut
- The 9 axis system has the ability to process all four sides of a structural tube as standard
- The 9 axis capability of the robot also gives full beveling on both the flanges and the web
- Automatic rotation of mitered parts in a nest to achieve common line cutting of miters
- Comprehensive 3-D nesting software that combines the cut on the trailing end of one part with the cut on the leading end of the next section in a mult. This eliminates the number of starts and stops to extend consumable life and reduces cut time to the minimum
- 3-D Simulation available
Tandem Drill and Robotic Coping Systems
- Requires less than half the space of a conventional split system
- Smaller capital investment
- Single operator
- The drill operator no longer waits for the coper operator or vice versa
- Positioning of the coper after the drill eliminates the minimum length finished part that can be off loaded on the exit side of the system
- One common CNC control all of the functions of the coper and the drill automatically
- Full robotic programmable motion for weld prep in both flanges and the web
- Ability to cut the bottom side of square tubes
- Optimized routine copes the trailing end of one section, leading end of the next section and cuts the sections to length in one optimized cycle
- Low maintenance cost due to the utilization of a standard PC platform
- The Ficep software eliminates the requirement for additional hardware such as third party axis control boards, PLC hardware and encoder switching boards
- The Ficep Windows based control is provided with the proprietary Ficep software for remote diagnostics through an internet connection
- Full single and compound miter cutting so the flange cuts accurately align with the web miter angle
- Full integration of drilling, coping, end preparation, cut off and more
